By: Jason Maxwell
Submitted: 2010-11-17 04:46:23 | Word Count: 466
The most crucial part of the project is the pump in building a water fountain. This is considered the heart of your fountain. The heart supplies life to it though it may be the body of the fountain that provides the esthetics which is the purpose of the project. Plus, the water pump produces the movement in the water. This prevents the water from being stagnant which will also prevent the growth of algae, mosquitoes, and other parasites. In the perceding sections below, we will discuss in detail regarding the operation and the maintenance.
If you are considering the acquisition of a new pump, you will make sure that it is has the appropriate features for your waterworks. That will include attention to details like the height of the head (the highest point the pump can deliver) or the length the tubing has to run from the pump. Make sure that the head that the pump is capable is more than the height of the fountain. Be sure that the pump can generate 100 gph for every inch of width of the water stream. Use small pumps to avoid splashing if your fountain is fond indoors.
[ advertisement ]
Make sure that the tubing fits into the pump nozzle. To remedy a tubing that with a small diameter, dunk the end of the tubing in boiling water for about 30 seconds, cram it through the nozzle, hold it in place, as it cools down it will contract & seal the water out. Tubing with a large diameter can be remedied by installing a screw-on clamp.
Dont replace it right away check out the following factors first if your old pump is not working properly. Ensure that the pump is clean. Take out any debris from the tubing. With the use of a toothbrush, scrub any build up of algae. Check the water level if it sufficiently submerges the pump. The pump wont work if it is above the level of water. If the water level is too low, the pump will make silly noises. The pond will overflow when the pump is turned on if the water level is too high. Inspect the connections of the tubing closely to see if there are any cracks or leakages. Put a rubber sink mat between the pump base and the pond basin to dampen vibrations.
A little ingenuity is the key to trouble shooting your fountain. Make sure that you take preventive measures so that you will not have problems in the future.
Author Resource:-
Have you been looking for a solar pond pump for your fountain? Look no more for you have found the dealer of all types pond pumps like the solar submersible pond pumps, table top fountains and many more. Visit us now!
