By: Stephen Drommonsy
Submitted: 2010-10-07 09:46:41 | Word Count: 915
Installing new vegetation and getting them to grow productively seriously is not difficult, nor is it as difficult as some may like you to think. Is it as easy as digging a hole and setting the plant in.
Balled in burlap (B and B).
Closely examine the ball on the plant that you've purchased. Did the diggers wrap twine all-around the ball to hold the plant secure? If they did, you must at the very least cut the cord and lay it in the bottom of the hole, or get rid of it totally. Pay close attention round the stem on the plant where it emerges at the root ball, diggers often wrap the twine round the stem several times as they secure the ball. It's particularly important because if ever the string is nylon, it is not going to rot and will choke and kill the plant two or three years down the line.
[ advertisement ]
Once B and B plants are stored at the nursery for unlimited durations of time it will become necessary to re-burlap them if the underside starts to rot before the plants are sold. If the plant that you buy has been re-burlaped it is possible that there can be nylon strings between to the two layers of burlap, check the stem deftly. So long as the nylon string is detached from round the stem of the plant, it it is actually harmless around the rest of the ball, and you will not need to do away with it.
What sort of soil are you planting in?
In case your soil is heavy clay, I would propose you raise the planting bed at least 8” with good rich topsoil. If you can't do this for any reason, install the plant in order that at the very least 2” or more of the root ball is above the existing ground and pile the soil over the root ball. Take into account that plants put in in this way may dry out over the summer, but planting them flush with your ground in heavy clay could mean the roots will probably be too damp at other times of the year.
The specialists advocate that when planting in clay soil you dig the hole wider and deeper than the root ball and fill around and under the plant with loose organic substance. That seems like a very good idea doesn't it? Some of these professionals also suggest that you dig the hole extra deep and put a few inches of gravel on the bottom for drainage. Where do they imagine this water is going to drain to? It will in point of fact sit in the base of the hole.
When water reaches our freshly planted tree surrounded by loose organic matter, it is will soak in until the planting hole is completely filled with water. By employing this planting practice we have actually developed what is known as a French drain around our poor little plant which cannot tolerate its roots being starved of oxygen for extended periods of time. As the bottom of this hole is clay, despite the fact that we have added gravel for drainage, there is nowhere for the water to go so it lays in the base of the hole, this starves the plant of oxygen which means that it is going to suffer and porbably die.
In the event you can’t raise the planting bed using topsoil, and you are planting in clay, I suggest that you just put the root ball a minimum of 2” above ground and backfill round the ball with the soil that you just removed when you dug the hole. Backfilling using the clay soil that you just removed is essentially like building a dam to prevent excess water from penetrating the root ball of the newly planted tree. The plant isn’t about to flourish with this poor soil, but at the very least it can have the possible opportunity to survive.
Container grown plants are much simpler.
Follow the principles for depth of planting as described earlier in this article. Before gently taking away the plant out of your container check the drain holes at the base of your container for roots that may be growing through the holes. If you find any, cut them off so they will not make it difficult to get the plant from the container.
Examine the root mass as you hold it in your hand. Now and then when plants have been growing in a container for a long period the roots start growing in a circular pattern around the root mass. This seriously is not healthy, and you should disturb these roots before planting so you can break this circular pattern. You can take a knife and actually make about three vertical slices at the top of the root mass to the bottom. This would stimulate new roots that should grow outward into the soil of your garden. Or it's possible just use your fingers and loosen the roots which are circling the root mass forcing them outward before you start planting them.
Author Resource:-
I’ve always had the gardens of my properties that I own maintained by the same gardener london company and through the years they've saved me a lot of my cash, just by giving me some very useful advise.
