By: Jack Wylde
Submitted: 2010-03-04 03:02:36 | Word Count: 511
Do you all want to know how installation of stereo in a car has to be done especially in luxury and high end cars? Then this the perfect article that we should read. Let us learn How to Install a Radio in a Volvo. Many may think this job is complicated and assign a professional to do this. But it is very simple. We can save few bucks by trying to do this installation on our own.
Why do we encounter a problem during installation.? Is it because of insufficient knowledge and experience to do this job. The answer is no. The problem arises when we make a wrong choice of stereo for our volvo which gives a series of complications. So our first job is to ensure if we are making a correct purchase. Compatibility needs to be checked. The perfect and matching stereo is not common for all volvo. It may vary from one year to another. Sometimes it may also change with different models.
[ advertisement ]
A simple screw driver is enough to do this installation. Of course we need a new stereo which we are going to install. Let us look at the step by step procedure. How is the compatibility check made? It is simple. A harness for wiring and a mount provision for stereo should be present in any system that is compatible. The wires connected to negative terminal of car battery is disconnected. These wires are usually painted black in color. Center console has screws attached to it. These screws are removed by the use of screw driver and the console after being taken out is kept separately.
The stereo that we need to replaced is removed and the harness for wiring is disconnected. The wire of antenna is also taken out from the rear side of the system. Now all these steps should be done in reverse for installation of new stereo. The harness for wiring is attached to the stereo to be installed. This connection is made by adapter for wiring harness.
In the same way wire for antenna also needs to be connected to the rear side of the stereo system. After all these are done the stereo is put into dash.
The last step we should supply power. This can be done by again connecting wire to the battery. The wire is to connected to the negative terminal. This wire will be present usually in black color. The job is done. However it is better to make a final check to see if we have finished installation of new stereo perfectly in our volvo. Just switch on radio. If it plays properly we should pat ourself because we have now become half professional. If it does not work let us not worry . Check if all connections and disconnections are done correctly. The only place where it is little risky top work with is the live wires. So ensure that the battery is switched off.
From the above steps we have got an idea on How to Install a Radio in a Volvo
Author Resource:-
Find the best car stereo deals at http://www.powernetshop.at the have the best product evaluation online.
