By: Jack Wylde
Submitted: 2010-03-04 02:16:44 | Word Count: 520
If you are one of the proud owners of a Volvo but you are still not satisfied because of the quality of the radio then continue reading this article. This article will show you how to install a radio in a Volvo. Normally installing an aftermarket radio in a car like Volvo is not very difficult if you manage to buy a radio which is compatible with your car. Hence ensure the compatibility of the radio and the car, to ease your work. By following this step by step procedure you can easily replace the radio of your car by yourself, without seeking any professional help.
For completing the installation process you will require nothing but a screw driver and a new radio that will act as the replacement for the old one.
[ advertisement ]
The first step is purchasing a new stereo system for your car. The radio can be purchased in a car parts retail showroom or through eBay. But make sure that the radio you are buying matches with the car that you own. Keeping the model of the car and the year of manufacture in your mind will help you in this regard. Also consult with the shop assistant to check the compatibility. The new stereo will have a wiring harness adapter attached to it. There will also be a mount present.
Now locate the negative wire that is connected to the battery. This wire is usually black in color. After finding it, disconnect the wire from the battery. The next step involves removing the centre console from the car. This is done by locating the screw that is holding the console in its place and removing them. After removing the screws, the console can be easily removed. After removing the console, remove the old stereo system from the car. Then disconnect the antenna wire and the wiring harness from the stereo. These wires will be located at the rear end of the stereo. The next step is securing the stereo mount in the dash with the help of clips. The usage of clips can be avoided if the stereo mount fits snugly in the dash.
There will be a wiring harness adapter present in the stereo. With the help of this adapter connect the wiring harness to the stereo. Connect the antenna wire to the back of the radio. The radio signals from the radio station will be received by the stereo with the help of this antenna. Hence ensure proper connection. After making this connection, place the stereo into the car`s dash.
Connect the negative wire to the car`s battery to turn on the car`s power. After making this connection check whether the radio is working properly by tuning it on. If it is not working then check the connections you have made with the stereo. The last step involves replacing the screws and the interiors which you removed during the installation process. This can be done by following the same procedure in the reverse order.
Follow these simple steps to remove the old radio and install a new radio in your Volvo.
Author Resource:-
Find the best car stereo deals at http://www.powernetshop.at the have the best product evaluation online.
