Use a Aux Input to Play (MP3/Ipod) Music on Your Factory Stereo
By: Jack Wylde
Submitted: 2010-02-10 20:15:51 | Word Count: 539
How to Install an Auxiliary Audio Input? An auxiliary audio input is essential for the car’s audio system to play the music from other small portable storage devices or music players. These small portable devices have very large memory and can store many files than the compact disc. These small devices have become very popular among the people all over the world just because of their large storage capacity and their portability.
In car’s audio system these external small devices can be plugged directly. But in many cars this cannot be done because of the unavailability of input ports in them. You can plug your external device easily with the auxiliary audio input installed. There are wide ranges of adapters available which can be installed on your own. You need not pay an engineer or a mechanic to do this. Doing so, you can save you hard earned money and valuable time.
[ advertisement ]
This article includes the things required to install the auxiliary audio input to the car’s audio system and the instructions that will allow you to install the auxiliary audio input on your own. Two main things that are required are panel tool and auxiliary input adapter. Make sure both these things are ready before you start the work. It is advised to have the panel tool kit always in your car so that any minor repair works can be done anytime.
The radio from the car’s dashboard should be removed first. Car’s make, model, year of manufacture are the factors that will decide the exact way to remove the radio from your car’s dashboard. The generalised method of removing the radio is explained here. There are four screws or bolts on the radio’s perimeter which is behind the dashboard panels of the car. Use the panel tool to remove the trim panels. Now, the screws or bolts are exposed. Use appropriate screw driver to remove those screws. It is advised to read the car’s instruction manual before you start removing the radio. http://Crutchfield.com is the site which sells the safe instructions to remove the radio and speaker from the car. You can also make use of this.
If the compact disc changer cable is already equipped at the back side of the radio unplug it carefully. This cable can be easily identified because it looks very similar to the auxiliary input adapter’s cable in size and shape.
The input cable is fed through the opening in the dashboard to the place where it should be connected. The end of the cable is identified by the glove box. The auxiliary input adapter is placed near the radio itself. Usually, you will find some space below or above the place where the radio is fixed.
Plug the input adapter into the back side of the radio with the plug which is already connected to the converter box. Replace the radio in the dashboard opening carefully. The operation of the radio and the auxiliary audio input is tested before the dashboard panels are fixed. If you find any difficulties refer the car’s instruction manual.
From this article we have learnt how to install an auxiliary audio input easily.
Author Resource:-
Find the best car stereo deals at powernetshop.at the have the best product evaluation online.
