By: Jack Wylde
Submitted: 2010-02-09 01:56:01 | Word Count: 533
In most of the stereo systems there is one only place to insert a CD so at any point of time only one CD can be kept inside. But if there is a disc changer installed in the system then it is possible to have a collection of CD inside the tape itself and switching from one to another CD can be done easily. The CD changer comes in a variety of design and based on or car and the size of the stereo one can buy the required CD changer. But how to install a six disc CD changer?
The CD changer also comes in a set of designs based on the model of the stereo this makes the process of selecting the CD changer easy. When the stereo and the CD changer are connected all the operations of the CD changer can be done using the stereo itself. There are a few tools required to complete this task its makes the job easier and a lot faster. The tools include a drill, a screw driver, a new CD changer, and a mounting kit for the CD changer.
[ advertisement ]
The first thing to do before connecting a CD changer is to select a perfect spot for it. The spot must give easy access for inserting and ejecting the CD easily. The changer is connected to the stereo of the car through a inner cable. This cable should be long enough so that the CD changer can be mounted in any location in the car.
The next step is to fix the CD changer in the selected place. The CD changer consists of a lot of brackets. The presence of these brackets makes it possible for mounting the CD changer vertically or in a horizontal plane or it also be left to hang. With the help of the drill small holes are done in the selected spot. Now the CD changer is fixed with the help of screws.
Now the stereo should be connected to the changer. This is done by connecting the control for the CD changer from the stereo to the changer itself. There is a port for plugging this cable in the rear side of the car s stereo. So for doing this first we have to remove the stereo from the dash board and then plug the cable in the port.
This can be done in more than one way as different cars have different ways of removing the stereo so based on the make of the car a suitable way is followed to remove the stereo from the dash board.
In many cars the CD changer is placed either in the back side or the trunk based on our choice. The cable can be inserted below the carpet to avoid a clumsy look.
The carpet can be removed by removing the scuff plates of the doors. Now after bringing the cable to the changer, it must be plugged in its place. In the last step we can choose the inclination of the changer and after this is done, the changer is screwed.
Thus knowing how to install a six disc CD changer is well explained in the above steps.
Author Resource:-
Find the best car stereo deals at http://www.powernetshop.at the have the best product evaluation online.
