By: Jack Wylde
Submitted: 2010-02-02 07:44:46 | Word Count: 545
Those days only a cassette player was available in a car. But these days music has taken the predominant form in CD and DVD. If you still own a cassette player in any car you can easily switch over to a CD player and modernize your car yourself. This can be done at a low cost as an after market CD player can be installed. But how to install a CD player?
One of the things to be noted while buying a new CD player is its size. Make sure that the CD player is of perfect size as provided in the dash board. While searching for a new in dash CD player care must be taken so that the model of your car as different cars have different make based on their model. It is also important to buy a car stereo connector for the wiring and an in dash CD player kit. This makes the work look more professional.
[ advertisement ]
The first step in the process is to find the things we must need to complete the task. Few things are very essential to build up a dash player kit and they are around twenty pieces of butt splices. They must have insulations done and wire strippers are must as during installation the pliers and strippers play a very important role. Lastly the most important is the wire which connects the stereo.
The first thing to do is to remove the insulation of quarter to half inches from the front and back end of the wire emerging from the back side of the music player. While removing the insulation it should be done in such a way that the wiring connections are not damaged.
In the next step in the process we should remove the insulation from all the wires that comes from the wiring connector for car stereo. The insulation should be removed for about 1/8 to quarter inches and here also care should be taken so as to avoid the damage caused to the internal wiring.
Now one of vinyl butt splice which is insulated and the orange wire s end is inserted from the wiring connector. The connection is done securely using the pliers. The pliers are used to cover the side of vinyl insulated butt splice. Now in a similar way fix another vinyl insulated butt splice from one of the orange wires that comes out from the player. Then using the pliers the vinyl insulated butt splice is securely connected to the wire.
Next thing to be done is to repeat the above step for all the wires that is present. Make sure that each wire is matched with the corresponding wire or it could lead to other faults. Then in order to install it, you can remove the dash board. But before doing this you should first go through the compact disc dash kit manual instruction. After that you can push both the player and the connector inside until a click sound is heard. The last steps include putting the screw back in its place and then starting the vehicle and check the functioning of the player.
One can modernize the car by knowing how to install an in dash CD player, and these steps helps to know it.
