By: Jack Wylde
Submitted: 2010-01-31 19:01:09 | Word Count: 504
Everyone aims of owning a car which has a cool, stylish, professional car stereo. In those cases one would consider wiring as the last option for his car. Noise suppression must be made in it so as to increase its aesthetics and performance of the car stereo. For this you must have the wire hidden as much as possible. But how to hide the wiring in auto stereo installation?
In the cases of uncovered wires there are possibilities of the noise transfer from one cable to the others. These wires are to be hidden to give a highly professional and customized look to your car stereo. Hiding the wire will also make it live longer as it reduces risk during accidents. There are few basic tools required for this task. They are Velcro stripping material, putty knife, cable ties, cordless drill, wire cutter, sheet metal screws, hex bits, flexible cable tubing.
[ advertisement ]
The main wires from the battery connections are to be hid first. This is the most important thing to be to be done initially. For accomplishing this the car s engine compartment is to be fitted with a specially designed plug. The wires are held in place by the small clamps and by using this and sheet metal screws one can install it to the frame of the car. Holes are drilled to fix these.
The next step involves the closing of tubing up by the zip ties. It is placed in a position about two to three feet below the flexible cable tubing. To avoid splicing of wires one can the wires should be connected together using the wiring harness. Such wiring harness can be bought from any car stereo shop.
The ideal place for keeping the wires under cover can be car s trim or its carpet or the indoor plastic trim. A putty knife can be used for pulling up the edges and also it can be used for pulling it down. When wires of different causes meet there is possibility of noise interference. To avoid this one can ensure from the car stereo shop personnel on what all wires to be bundled together and what all to be made to run in an opposite direction.
Avoid mounting of wires near any kind of sharp edged objects which may possibly damage the wires. The flexible cable tubing can be held up by the Velcro stripping material without drilling any kind of holes. While running back these wires to the sub woofers, rear speakers, amplifiers and crossovers hiding the wires at the back panels is essential.
Consult with a shop personnel on how to remove these wires without damaging them. There are special connectors at the amplifiers and sub woofer which shows off the connections alone. Custom built panels can also be used for giving a very professional look to the car stereo system.
Answering the question how to hide the wiring in auto stereo installation, becomes simple by just following the steps mentioned above which will make it very simple.
Author Resource:-
Find the best car stereo deals at powernetshop.at the have the best product evaluation online.
