By: Jack Wylde
Submitted: 2010-01-30 20:28:53 | Word Count: 528
There are two types of currents one is the alternating current and the other is the direct current. The alternating current can be abbreviated as AC and direct current as DC. All types of electrical appliances cannot be handled with alternating current. Hence conversion of it from alternating current to direct current is very essential. The AC to DC convertors which can also be called as a power supplier is used for converting the alternating current into direct current. But how to wire an AC to DC convertor?
But these convertors can be used only when you are in need of power in DC like components of a car audio system and other parts of it. A standard household power is required for it to access the DC output power. Wiring of this AC to DC converter consists of several steps which are simple in carrying out. Few initial preparatory steps and simple wiring connection can give a good AC to DC converter. A proper wiring can ensure the perfect functioning of this converter. The reason for doing this is to get a stable DC output.
[ advertisement ]
A few required tools for performing this operation includes crimping tool, wire strippers to remove excess wire and ring terminal. With the help of these tools the required man power can be reduced to a greater extent. By turning the thumb screws and wing nuts of the power terminals of the DC converter to left, they can be loosened and thus removed.
Half inch of insulation must be removed from the DC s positive as well as the negative terminals. This is then connected securely to the AC to DC converter. The positive wire will be red in color where as the negative wires are made of black colors. This color difference is used to distinguish among them easily. Though it is not true in some cases. To avoid confusion causing problems one can always refer to the manual given to the user by the manufacturer. The wiring diagram can also be used for ensuring proper wiring.
The next step involves the usage of ring terminals. A ring terminal is slid off onto each wire s bare ends.
Next we can make use of the crimping tool. It is used for crimping the wire to the terminal. Improper crimping may lead to many defects so ensure the connection before switching on the AC power supply.
There are two separate portals for the connection of positive and negative wires from the ends of the DC device. The positive end of the wire is fastened to the positive terminal of the AC to DC converter where as the negative end of the wire is connected to the negative terminal of the AC to DC converter. Using thumb screws and the wing nuts the terminals are connected to the wires in a proper way.
The last step is very simple it is just connection of the converter into the wall outlet. Switch on the converter and you can get the required power for your system.
The question how to wire an AC to DC convertor in a very simple way by performing the above steps.
